修理

如何解決“Windows無法與設備或資源交流’ 問題

Is your computer screen flashing the ‘Windows無法與設備或資源交流“錯誤? This error could be frustrating if you were just trying to go offline. 然而, you should not give in to frustration. You need to look for a solution for fixing this issue. 在這篇文章中, we are going to discuss some effective fixes to resolve this annoying error.

After turning on your Windows system, you find that you could not access the internet. 在這種情況下, you troubleshoot the issue with the Windows Network Diagnostics program. Once the troubleshooting is over, you come across the error saying ‘Windows無法與設備或資源交流 (primary DNS server).’ If you have no idea how to resolve this issue, keep on reading below.

平時, this network issue is occurred due to the DNS problems or other network driver issues. 這裡, we are listing several solutions that one can try to resolve this error. 無疑, you would not have to try all of them. 所以, just move your way down, starting from the top until you come across the one that actually resolves your issue. These solutions apply to various Windows versions like 8.1, 8, 7, 和 10. 現在, look for these diverse solutions and know what you have to do exactly.


解 1: Modify Adapter Settings to Fix ‘Windows can’t communicate with the device or resource’

It is quite possible that the error ‘Windows can’t communicate with the device or resource’ occurred due to the chosen adapter settings. If this is the issue, then perform several quick modifications. 要執行此操作, follow some simple steps listed below.

除了, here is the top solutions for 您的DNS服務器可能不可用 為你.

Steps to fix ‘Windows can’t communicate with the device or resource(primary DNS server):

步 1: Open ‘控制面板‘ on your computer after tapping on the ‘開始' 標籤

步 2: Navigate to the ‘Network and Internet' 選項

步 3: Within the ‘Network and Sharing Center‘ section, choose ‘View network status and tasks

步 4: 在這之後, open the ‘Change Adapter Settings' 標籤

步 5: Select the existing network connection and right-tap on the same. Once selected, you have to click on the ‘屬性' 標籤.

步 6: Check the box against ‘Internet Protocol Version 4 (IPv4/TCP)‘ and then visit ‘屬性.“

步 7: Within the tab ‘一般,’ select the options as follows:

  • Obtain DNS server address automatically
  • Obtain an IP address automatically

在這之後, 按 .

除了, if you are facing issues like Your PC ran into a problem and needs to restart 要么 scanning and repairing drive stuck, 點擊立即進行修復.


解 2: Update the Driver to Fix ‘Windows can’t communicate with the device or resource’

Another reason behind the ‘Windows can’t communicate with the device or resource’ error could be the outdated network drivers. Most network connection issues occur due to this reason. If you are looking for a solution, then updating your drivers through a manual update is the right answer.

PS: Here are the top solutions for the problems of 桌面窗口管理器的高CPU最後USB設備出現了故障在Windows 10, 以及 USB設備無法識別.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To get rid of this annoying error, 按照下面列出的說明.

步 1: 首先, visit your network’s official website. 從那裡, search for your drivers

步 2: 下一個, you have to look for the latest driver. 一旦發現, download that driver and install the same.


解 3: Edit the HostsFile to Fix ‘Windows can’t communicate with the device or resource’

Another reason for getting the ‘Windows can’t communicate with the device or resource’ error could be your host’s file. 因此, it is advised to get rid of these files to stop seeing this annoying error on your computer screen.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To eliminate this annoying issue, you need to go through some steps as follows:

步 1: 原來, access the system’s folder and open ‘視窗 (C:).“

步 2: 從那裡, open ‘視窗' 接著, “System32“. 下一個, 選擇“drivers‘ option and then, “等等.“

步 3: 現在, find your hosts file and open it with the help of Notepad.

步 4: Choose everything in that file, 和明年, delete it.

步 5: 最後, 輕按 '保存‘ and remember here to select ‘All Files‘ while saving for the file type.


解 4: Go to Public DNS

The ‘Windows can’t communicate with the device or resource’ error could be due to an issue with the DNS. 如果是這樣的話, you should switch to the Public DNS of Google. 這樣做的, go through the following steps.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To resolve this error, you need to follow the steps given below.

步 1: Visit Control Panel and then select ‘Network and the Internet.“

步 2: 選擇 'Network and Sharing Center

步 3: 選擇 'Change Adapter Settings

步 4: Choose your network and right-tap on it

步 5: 下一個, 選擇 '屬性“,選擇”Internet Protocol Version 4 (TCP/IPv4)‘ under the tab ‘Networking.“

步 6: 現在, 選擇 '使用下面的DNS服務器地址‘ within the tab ‘一般.“

步 7: 最後, set your ‘Preferred DNS Server‘ to 8.8.8.8 然後按 .


解 5: Clear the DNS Cache to Fix ‘Windows can’t communicate with the device or resource’

If the above method doesn’t work for you, you should try clearing things up. The corrupted DNS cache could be the reason behind the ‘Windows can’t communicate with the device or resource’ issue. 如果是這樣, you have to perform some cleaning.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

現在, follow the given instructions to clear the cache of your DNS server.

步 1: Begin by launching ‘Command Prompt‘ on your system. 在這之後, ensure that you have selected ‘Run as Administrator.“

步 2: 下一個, enter the command as ‘ipconfig/flushdns‘ and lastly, press ‘輸入.“


解 6: Look for Malware

Once you have tried all the above-mentioned fixes and could not connect to the network, it is quite possible that the computer might be infected by some malware. 在這種情況下, you need to clean the system thoroughly. On spotting any malware, users have to remove it immediately. 為了這, they can use a professional program like Windows Defender.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

For eliminating this issue, run a malware scan on your system.

步 1: 首先, you have to launch ‘設置.“

步 2: 選擇 '更新 & 安全‘ and then visit ‘Windows Security.“

步 3: Choose ‘Virus & Threat Protection',然後輕按“Run a new advanced scan.“

步 4: 下一個, select to perform a ‘Full Scan,’ and lastly, press ‘Scan now.“


解 7: Update the Network Driver Automatically

The ‘Windows can’t communicate with the device or resource’ issue could be there due to a faulty network driver. For eliminating this issue, users have to update their network drivers. 平時, there are two methods to update the driver: automatically or manually.

In the first solution, we have listed the steps that you need to follow to update the network driver manually. 這裡, you have to choose the latest version from the official website of your driver and install the same.

When it comes to an automatic driver update, you do not need to go through any complication. People who do not have the patience, computer skills, or time for updating the network driver manually, they can do so automatically using third-party programs like 驅動程序簡單. This program will recognize the system automatically and look for the best drivers for your Windows version and the network card. Driver Easy will download the network driver itself and install the same correctly.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

要解決這個問題, update your network driver using Driver Easy in the following way.

步 1: Download Driver Easy and install the same.

獲取驅動程序簡單

步 2: Launch the program and tap on ‘現在掃描.' 下一個, this program will scan your system and look for any problem driver.

驅動程序簡單

步 3: 輕按 '更新,’ coming next to the network driver for download and install the driver’s correct version. One can perform this action even with the free version of Driver Easy.

步 4: Else, you can select ‘全部更新‘ for downloading and install the recent version automatically of all of your drivers, which are outdated or missing on your computer. To carry out this feature, you need the premium version of Driver Easy. This version features full support as well as a 30-day money-back guarantee. If you select ‘全部更新,’ you will be taken to the upgrade window.

驅動程序簡單

步 5: Once you have updated the driver, see if your problem has been resolved or not.

If you are still facing the ‘Windows can’t communicate with the device or resource’ issue, then see if you have gotten the DNS pollution cache problem. This could be the reason why you could not connect to the internet.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To check the DNS pollution cache problem, 經過下面的說明.

步 1: Press keys ‘視窗“ + “[R‘ together for invoking the Run dialog box.

步 2: 輸入“CMD‘ and hit ‘輸入‘ for opening the command prompt window.

步 3: 下一個, 輸入 nslookup + the website address that you like to open — for example, nslookup drivereasy.com. Once entered, you have to hit ‘輸入.“

步 4: 輸入 nslookup + the website address + 8.8.8.8 that you like to open, where 8.8.8.8 is the free public DNS of Google. 例如, nslookup drivereasy.com 8.8.8.8. 現在, hit ‘輸入.“

Verify if step 3 and step 4 return the same IP address. If the address is the same, you do not get the DNS pollution cache problem. 如果不, then the network issue is occurring because of the DNS pollution cache.


所以, these are some of the most effective solutions to resolve the issue ‘Windows無法與設備或資源交流.’ Try these methods one by one until you come across something that actually works for you. 現在, wait no more and resolve this annoying issue on your own using these incredible solutions.


標籤