Ремонт

Как исправить «Windows не может взаимодействовать с устройством или ресурсом’ вопрос

Is your computer screen flashing the ‘Окна не могут обмениваться данными с устройством или ресурсом' ошибка? This error could be frustrating if you were just trying to go offline. Однако, you should not give in to frustration. You need to look for a solution for fixing this issue. В этой статье, we are going to discuss some effective fixes to resolve this annoying error.

After turning on your Windows system, you find that you could not access the internet. В этой ситуации, you troubleshoot the issue with the Windows Network Diagnostics program. Once the troubleshooting is over, you come across the error saying ‘Окна не могут обмениваться данными с устройством или ресурсом (primary DNS server).’ If you have no idea how to resolve this issue, keep on reading below.

Как правило, this network issue is occurred due to the DNS problems or other network driver issues. Вот, we are listing several solutions that one can try to resolve this error. определенно, you would not have to try all of them. Так, just move your way down, starting from the top until you come across the one that actually resolves your issue. These solutions apply to various Windows versions like 8.1, 8, 7, а также 10. Теперь, look for these diverse solutions and know what you have to do exactly.


Решение 1: Modify Adapter Settings to Fix ‘Windows can’t communicate with the device or resource’

It is quite possible that the error ‘Windows can’t communicate with the device or resource’ occurred due to the chosen adapter settings. If this is the issue, then perform several quick modifications. Для выполнения этого действия, follow some simple steps listed below.

Кроме, here is the top solutions for Ваш DNS-сервер может быть недоступен для тебя.

Steps to fix ‘Windows can’t communicate with the device or resource(primary DNS server):

шаг 1: Открыто 'пульт управления‘ on your computer after tapping on the ‘Началовкладка»

шаг 2: Navigate to the ‘Network and Internetопция»

шаг 3: Within the ‘Network and Sharing Center‘ section, выберите 'View network status and tasks«

шаг 4: После этого, open the ‘Change Adapter Settingsвкладка»

шаг 5: Select the existing network connection and right-tap on the same. Once selected, вы должны нажать на «свойствавкладка».

шаг 6: Check the box against ‘Internet Protocol Version 4 (IPv4/TCP)‘ and then visit ‘свойства

шаг 7: Within the tab ‘Генеральная,’ select the options as follows:

  • Obtain DNS server address automatically
  • Obtain an IP address automatically

После этого, Нажмите OK.

Кроме, if you are facing issues like Your PC ran into a problem and needs to restart или scanning and repairing drive stuck, нажмите, чтобы исправить их сейчас.


Решение 2: Update the Driver to Fix ‘Windows can’t communicate with the device or resource’

Another reason behind the ‘Windows can’t communicate with the device or resource’ error could be the outdated network drivers. Most network connection issues occur due to this reason. If you are looking for a solution, then updating your drivers through a manual update is the right answer.

PS: Here are the top solutions for the problems of Desktop Window Manager High CPU а также Последнее устройство USB сбоев на Windows, 10, так же как USB устройство не распознается.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To get rid of this annoying error, следуйте инструкциям, приведенным ниже.

шаг 1: в первую очередь, visit your network’s official website. Оттуда, search for your drivers

шаг 2: следующий, you have to look for the latest driver. Найдя, download that driver and install the same.


Решение 3: Edit the HostsFile to Fix ‘Windows can’t communicate with the device or resource’

Another reason for getting the ‘Windows can’t communicate with the device or resource’ error could be your host’s file. Следовательно, it is advised to get rid of these files to stop seeing this annoying error on your computer screen.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To eliminate this annoying issue, you need to go through some steps as follows:

шаг 1: Первоначально, access the system’s folder and open ‘Windows (С:)

шаг 2: Оттуда, open ‘Windows' а потом, «System32«. следующий, выберите «drivers‘ option and then, «и т.д

шаг 3: Теперь, find your hosts file and open it with the help of Notepad.

шаг 4: Choose everything in that file, и рядом, delete it.

шаг 5: наконец, нажать на 'Сохранить‘ and remember here to select ‘All Files‘ while saving for the file type.


Решение 4: Go to Public DNS

The ‘Windows can’t communicate with the device or resource’ error could be due to an issue with the DNS. Если дело обстоит именно так, you should switch to the Public DNS of Google. Для делать это, go through the following steps.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To resolve this error, you need to follow the steps given below.

шаг 1: Visit Control Panel and then select ‘Network and the Internet

шаг 2: Выбрать 'Network and Sharing Center«

шаг 3: Выбрать 'Change Adapter Settings«

шаг 4: Choose your network and right-tap on it

шаг 5: следующий, Выбрать 'свойства«И выберите«Internet Protocol Version 4 (TCP/IPv4)«На вкладке«Networking

шаг 6: Теперь, Выбрать 'Использовать следующие адреса DNS-сервера‘ within the tab ‘Генеральная

шаг 7: наконец, set your ‘Preferred DNS Server‘ to 8.8.8.8 а затем нажмите OK.


Решение 5: Clear the DNS Cache to Fix ‘Windows can’t communicate with the device or resource’

If the above method doesn’t work for you, you should try clearing things up. The corrupted DNS cache could be the reason behind the ‘Windows can’t communicate with the device or resource’ issue. Если так, you have to perform some cleaning.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

Теперь, follow the given instructions to clear the cache of your DNS server.

шаг 1: Begin by launching ‘Command Prompt‘ on your system. После этого, ensure that you have selected ‘Run as Administrator

шаг 2: следующий, enter the command as ‘ipconfig/flushdns‘ and lastly, Нажмите 'Войти


Решение 6: Look for Malware

Once you have tried all the above-mentioned fixes and could not connect to the network, it is quite possible that the computer might be infected by some malware. В таком случае, you need to clean the system thoroughly. On spotting any malware, users have to remove it immediately. Для этого, they can use a professional program like Windows Defender.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

For eliminating this issue, run a malware scan on your system.

шаг 1: в первую очередь, you have to launch ‘настройки

шаг 2: Выбрать 'Обновить & Безопасность‘ and then visit ‘Windows Security

шаг 3: Выбирать 'Virus & Threat Protection‘ and then tap on ‘Run a new advanced scan

шаг 4: следующий, select to perform a ‘Full Scan,’ and lastly, Нажмите 'Scan now


Решение 7: Update the Network Driver Automatically

The ‘Windows can’t communicate with the device or resource’ issue could be there due to a faulty network driver. For eliminating this issue, users have to update their network drivers. Как правило, there are two methods to update the driver: automatically or manually.

In the first solution, we have listed the steps that you need to follow to update the network driver manually. Вот, you have to choose the latest version from the official website of your driver and install the same.

When it comes to an automatic driver update, you do not need to go through any complication. People who do not have the patience, computer skills, or time for updating the network driver manually, they can do so automatically using third-party programs like Driver Easy. This program will recognize the system automatically and look for the best drivers for your Windows version and the network card. Driver Easy will download the network driver itself and install the same correctly.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

Чтобы устранить эту проблему, update your network driver using Driver Easy in the following way.

шаг 1: Download Driver Easy and install the same.

Get Driver Easy

шаг 2: Launch the program and tap on ‘Scan Now.' Следующий, this program will scan your system and look for any problem driver.

Driver Easy

шаг 3: Нажать на 'Обновить,’ coming next to the network driver for download and install the driver’s correct version. One can perform this action even with the free version of Driver Easy.

шаг 4: Else, you can select ‘Update All‘ for downloading and install the recent version automatically of all of your drivers, which are outdated or missing on your computer. To carry out this feature, you need the premium version of Driver Easy. This version features full support as well as a 30-day money-back guarantee. If you select ‘Update All,’ you will be taken to the upgrade window.

Driver Easy

шаг 5: Once you have updated the driver, see if your problem has been resolved or not.

If you are still facing the ‘Windows can’t communicate with the device or resource’ issue, then see if you have gotten the DNS pollution cache problem. This could be the reason why you could not connect to the internet.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To check the DNS pollution cache problem, пройти следующие инструкции.

шаг 1: Press keys ‘Windows« + «р‘ together for invoking the Run dialog box.

шаг 2: Войти 'CMD‘ and hit ‘Войти‘ for opening the command prompt window.

шаг 3: следующий, войти nslookup + the website address that you like to open — for example, nslookup drivereasy.com. Once entered, you have to hit ‘Войти

шаг 4: Войти nslookup + the website address + 8.8.8.8 that you like to open, where 8.8.8.8 is the free public DNS of Google. Например, nslookup drivereasy.com 8.8.8.8. Теперь, hit ‘Войти

Verify if step 3 and step 4 return the same IP address. If the address is the same, you do not get the DNS pollution cache problem. Если не, then the network issue is occurring because of the DNS pollution cache.


Так, these are some of the most effective solutions to resolve the issue ‘Окна не могут обмениваться данными с устройством или ресурсом.’ Try these methods one by one until you come across something that actually works for you. Теперь, wait no more and resolve this annoying issue on your own using these incredible solutions.


Теги
близко
близко