Reparation

Sådan Fix ’Windows kan ikke kommunikere med enheden eller ressource’ Problem

Is your computer screen flashing the ‘Windows kan ikke kommunikere med enheden eller ressource’fejl? This error could be frustrating if you were just trying to go offline. Imidlertid, you should not give in to frustration. You need to look for a solution for fixing this issue. I denne artikel, we are going to discuss some effective fixes to resolve this annoying error.

After turning on your Windows system, you find that you could not access the internet. I denne situation, you troubleshoot the issue with the Windows Network Diagnostics program. Once the troubleshooting is over, you come across the error saying ‘Windows kan ikke kommunikere med enheden eller ressource (primary DNS server).’ If you have no idea how to resolve this issue, keep on reading below.

Som regel, this network issue is occurred due to the DNS problems or other network driver issues. Her, we are listing several solutions that one can try to resolve this error. Helt bestemt, you would not have to try all of them. Så, just move your way down, starting from the top until you come across the one that actually resolves your issue. These solutions apply to various Windows versions like 8.1, 8, 7, og 10. Nu, look for these diverse solutions and know what you have to do exactly.


Løsning 1: Modify Adapter Settings to Fix ‘Windows can’t communicate with the device or resource’

It is quite possible that the error ‘Windows can’t communicate with the device or resource’ occurred due to the chosen adapter settings. If this is the issue, then perform several quick modifications. For at udføre denne handling, follow some simple steps listed below.

Udover, here is the top solutions for Your DNS Server Might Be Unavailable for dig.

Steps to fix ‘Windows can’t communicate with the device or resource(primary DNS server):

Trin 1: Open ‘Kontrolpanel‘ on your computer after tapping on the ‘Start’fane

Trin 2: Navigate to the ‘Network and Internet' mulighed

Trin 3: Within the ‘Network and Sharing Center‘ section, choose ‘View network status and tasks

Trin 4: Efter dette, open the ‘Change Adapter Settings’fane

Trin 5: Select the existing network connection and right-tap on the same. Once selected, you have to click on the ‘Ejendomme’fane.

Trin 6: Check the box against ‘Internet Protocol Version 4 (IPv4/TCP)‘ and then visit ‘Ejendomme.’

Trin 7: Within the tab ‘Generel,’ select the options as follows:

  • Obtain DNS server address automatically
  • Obtain an IP address automatically

Efter dette, trykke O.K.

Udover, if you are facing issues like Your PC ran into a problem and needs to restart eller scanning and repairing drive stuck, klik for at løse dem nu.


Løsning 2: Update the Driver to Fix ‘Windows can’t communicate with the device or resource’

Another reason behind the ‘Windows can’t communicate with the device or resource’ error could be the outdated network drivers. Most network connection issues occur due to this reason. If you are looking for a solution, then updating your drivers through a manual update is the right answer.

PS: Here are the top solutions for the problems of Desktop Window Manager Høj CPU og The Last USB-enhed er fejlbehæftet på Windows 10, såvel som USB-enhed genkendes ikke.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To get rid of this annoying error, følg instruktionerne angivet nedenfor.

Trin 1: for det første, visit your network’s official website. Derfra, search for your drivers

Trin 2: Næste, you have to look for the latest driver. gang fundet, download that driver and install the same.


Løsning 3: Edit the HostsFile to Fix ‘Windows can’t communicate with the device or resource’

Another reason for getting the ‘Windows can’t communicate with the device or resource’ error could be your host’s file. Derfor, it is advised to get rid of these files to stop seeing this annoying error on your computer screen.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To eliminate this annoying issue, you need to go through some steps as follows:

Trin 1: I første omgang, access the system’s folder and open ‘vinduer (C:).’

Trin 2: Derfra, open ‘vinduer‘ and then, ’System32’. Næste, vælge ’drivers‘ option and then, ’etc.’

Trin 3: Nu, find your hosts file and open it with the help of Notepad.

Trin 4: Choose everything in that file, og næste, delete it.

Trin 5: Endelig, trykke på 'Gemme‘ and remember here to select ‘All Files‘ while saving for the file type.


Løsning 4: Go to Public DNS

The ‘Windows can’t communicate with the device or resource’ error could be due to an issue with the DNS. Hvis dette er tilfældet, you should switch to the Public DNS of Google. For at gøre det, go through the following steps.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To resolve this error, you need to follow the steps given below.

Trin 1: Visit Control Panel and then select ‘Network and the Internet.’

Trin 2: Vælg 'Network and Sharing Center

Trin 3: Vælg 'Change Adapter Settings

Trin 4: Choose your network and right-tap on it

Trin 5: Næste, Vælg 'Ejendomme’Og vælg’Internet Protocol Version 4 (TCP/IPv4)‘ under the tab ‘Networking.’

Trin 6: Nu, Vælg 'Use the following DNS server addresses‘ within the tab ‘Generel.’

Trin 7: Endelig, set your ‘Preferred DNS Server‘ to 8.8.8.8 og derefter trykke O.K.


Løsning 5: Clear the DNS Cache to Fix ‘Windows can’t communicate with the device or resource’

If the above method doesn’t work for you, you should try clearing things up. The corrupted DNS cache could be the reason behind the ‘Windows can’t communicate with the device or resource’ issue. Hvis så, you have to perform some cleaning.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

Nu, follow the given instructions to clear the cache of your DNS server.

Trin 1: Begin by launching ‘Command Prompt‘ on your system. Efter dette, ensure that you have selected ‘Run as Administrator.’

Trin 2: Næste, enter the command as ‘ipconfig/flushdns‘ and lastly, press ‘Gå ind.’


Løsning 6: Look for Malware

Once you have tried all the above-mentioned fixes and could not connect to the network, it is quite possible that the computer might be infected by some malware. I det tilfælde, you need to clean the system thoroughly. On spotting any malware, users have to remove it immediately. For det, they can use a professional program like Windows Defender.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

For eliminating this issue, run a malware scan on your system.

Trin 1: for det første, you have to launch ‘Indstillinger.’

Trin 2: Vælg 'Opdatering & Sikkerhed‘ and then visit ‘Windows Security.’

Trin 3: Choose ‘Virus & Threat Protection‘ and then tap on ‘Run a new advanced scan.’

Trin 4: Næste, select to perform a ‘Full Scan,’ and lastly, press ‘Scan now.’


Løsning 7: Update the Network Driver Automatically

The ‘Windows can’t communicate with the device or resource’ issue could be there due to a faulty network driver. For eliminating this issue, users have to update their network drivers. Som regel, there are two methods to update the driver: automatically or manually.

In the first solution, we have listed the steps that you need to follow to update the network driver manually. Her, you have to choose the latest version from the official website of your driver and install the same.

When it comes to an automatic driver update, you do not need to go through any complication. People who do not have the patience, computer skills, or time for updating the network driver manually, they can do so automatically using third-party programs like driver Nem. This program will recognize the system automatically and look for the best drivers for your Windows version and the network card. Driver Easy will download the network driver itself and install the same correctly.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To fix this issue, update your network driver using Driver Easy in the following way.

Trin 1: Download Driver Easy and install the same.

Få driver Nem

Trin 2: Launch the program and tap on ‘Scan nu.' Næste, this program will scan your system and look for any problem driver.

driver Nem

Trin 3: Trykke på 'Opdatering,’ coming next to the network driver for download and install the driver’s correct version. One can perform this action even with the free version of Driver Easy.

Trin 4: Else, you can select ‘Opdater alle‘ for downloading and install the recent version automatically of all of your drivers, which are outdated or missing on your computer. To carry out this feature, you need the premium version of Driver Easy. This version features full support as well as a 30-day money-back guarantee. If you select ‘Opdater alle,’ you will be taken to the upgrade window.

driver Nem

Trin 5: Once you have updated the driver, see if your problem has been resolved or not.

If you are still facing the ‘Windows can’t communicate with the device or resource’ issue, then see if you have gotten the DNS pollution cache problem. This could be the reason why you could not connect to the internet.

Steps to fix ‘Windows can’t communicate with the device or resource (primary DNS server):

To check the DNS pollution cache problem, gå gennem følgende instruktioner.

Trin 1: Press keys ‘vinduer’ + ’R‘ together for invoking the Run dialog box.

Trin 2: Enter ‘cmd‘ and hit ‘Gå ind‘ for opening the command prompt window.

Trin 3: Næste, gå ind nslookup + the website address that you like to open — for example, nslookup drivereasy.com. Once entered, you have to hit ‘Gå ind.’

Trin 4: Gå ind nslookup + the website address + 8.8.8.8 that you like to open, where 8.8.8.8 is the free public DNS of Google. For eksempel, nslookup drivereasy.com 8.8.8.8. Nu, hit ‘Gå ind.’

Verify if step 3 and step 4 return the same IP address. If the address is the same, you do not get the DNS pollution cache problem. Hvis ikke, then the network issue is occurring because of the DNS pollution cache.


Så, these are some of the most effective solutions to resolve the issue ‘Windows kan ikke kommunikere med enheden eller ressource.’ Try these methods one by one until you come across something that actually works for you. Nu, wait no more and resolve this annoying issue on your own using these incredible solutions.


Tags
Tæt
Tæt